Yaskawa RC5 Converter - Manual (Page 38)

4.4 Using the Digital Operator
38 YASKAWA ELECTRIC TOEP C710656 01C YASKAWA - RC5 Instruction Manual
Table 4.1 Key Function
Note: Except diagrams, keys are referred to using the key names listed in the above table.
Key Name Function
LOCAL/REMOTE Key
Switches between operation (LOCAL) via the Digital Operator and control circuit terminal (REMOTE)
operation.
This key can be enabled or disabled by setting o2-01.
MENU Key Displays menus.
ESC Key Returns to the status before the DATA/ENTER Key was pressed.
JOG Key Not used.
FWD/REV Key Not used.
RESET Key
Set the number of digits for parameter settings.
Also acts as the reset Key when a fault has occurred.
Increment Key Selects menu items, groups, functions, and parameter names, and increments set values.
Decrement Key Selects menu items, groups, functions, and parameter names, and decrements set values.
DATA/ENTER Key Enters menu items, functions, parameters, and set values after they are set.
RUN Key Starts the RC5 operation when the RC5 in operation with the Digital Operator.
STOP Key
Stops RC5 operation.
This Key can be enabled or disabled by setting o2-02 when operating from the control circuit terminal.
LOCAL
REMOTE
MENU
ESC
JOG
FWD
REV
RESET
DATA
ENTER
RUN
STOP