TA Triumph-Adler FAX 930 - Manual (Page 32)

2 7
PAPERLESS RECEPTION
If you select WITHOUT PAPER, your fax machine will receive incoming faxes directly to memory when its printer is
unavailable.
If you select WITH PAPER, your fax machine will refuse incoming faxes when its printer is unavailable.
To set your fax machine to WITHOUT PAPER mode, press MENU followed by 2, 5, 2, 1 and OK.
To set your fax machine to WITH PAPER mode, press MENU followed by 2, 5, 2, 2 and OK.
4. NETWORK
NETWORK TYPE
The telephone line to which your fax machine is connected can be linked to a public network, or to a private network
(running off a corporate automatic telephone exchange, or PABX).
To configure your fax machine for operating on a private network (PABX), press MENU followed by 2, 6, 1, 1
and OK.
To configure your fax machine for operating on a public network (PSTN), press MENU followed by 2, 6, 1, 2
and OK.
DIAL MODE
This is the dial mode used by the automatic telephone exchange to which your fax machine is connected: pulse or tone.
To determine which dial mode is in use, select TONE dialling and test your setup by calling someone. If you are unable
to connect, switch to PULSE dialling.
To configure your fax machine for TONE dialling, press MENU followed by 2, 6, 2, 1 and OK.
To configure your fax machine for PULSE dialling, press MENU followed by 2, 6, 2, 2 and OK.
5. DIRECT INCOMING FAXES TO MEMORY “FAX ANSWER MODE”
ACTIVATING
This function enables you to request incoming faxes to be stored in memory rather than printed out. This facility provides
protects the confidentiality of incoming faxes.
To activate FAX ANSWER mode, press MENU followed by 4, 1, 2, 1 and OK. The Fax Messages indicator lights
up (it starts to flash when your unit receives incoming faxes).
To de-activate FAX ANSWER mode, press MENU followed by 4, 1, 2, 2 and OK. The Fax Messages indicator
switches off.
Note:
This mode has nothing to do with the Fax-answering mode and does not require the presence of an answering device.
If you want to print a fax from the memory, press the MENU, 4, 1, 1 and OK keys.
To remotely poll the contents of the fax-answering machine, proceed as described in the chapter ADVANCED
COMMUNICATION FUNCTIONS § Retrieving faxes from remote mailboxes, using mailbox 00.
In that case, the code of the fax-answering machine will be the polling code for mailbox 00.
FAX ANSWER SECURITY CODE
The confidentiality of your incoming faxes is protected by a 4-digit security code. Once you set this code, you will need
to enter it in order to print out any incoming faxes that have been saved in the unit’s memory. You will also need to enter
it to de-activate FAX ANSWER mode.
To enter a fax answer security code, press MENU followed by 4, 3 and OK; enter the code, then press OK.
CH06 23228395-7.P65 10/08/2000, 07:42 27