Safety warnings – TA Triumph-Adler FAX 930 User Manual

Page 5

Advertising
background image

SAFETY WARNINGS

Before powering on your unit, make sure the mains outlet it is connected to
meets the requirements printed on the warning label on your unit, or on the
separate power supply (depending on the model).
If your unit works with a separate Power Supply, use only the one delivered
with your unit; never use another power supply.

If your unit works with a battery, replace it only with the same type of battery
or an equivalent type recommended by the manufacturer.

Warning:

incorrect replacement of the battery may cause an explosion.

Used batteries must be disposed of following the manufacturer’s instructions.
Depending on the model, the unit’s mains plug may be the only way to
disconnect the unit from the power network. Therefore you must respect the
following:

Your unit must be connected to a mains outlet located nearby.

The mains outlet must remain easily accessible.

Your unit is delivered with a power cord including a plug which, depending
on the model, may be:

without earth (the symbol on the warning label)

with earth (no symbol on the warning label). It is imperative that a power
plug with an earth be connected to a wall outlet with an earth.

The European version of this unit includes the

stamp, following the 73/

23/CEE, 89/336/CEE and 93/68/CEE directives.

APPAREIL A RAYONNEMENT LASER
DE CLASSE 1
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LASER DE CLASE 1
APARELHO A LASER DE CLASSE 1

If the machine is powered when you remove the
upper cover, be careful with the two following
dangers:

.

Laser beam interception by human eye can
produce irremediable injuries.

.

Human contact with parts electrically
powered can produce a very dangerous
electric shock.

23225972-4B

Advertising