TA Triumph-Adler FAX 930 User Manual
Page 39
3 4
•
In "WITHOUT CALL FILTERING", the messages are recorded in silence:
.
you can, however, take the communication by lifting the handset,
.
you can adjust the volume of the SPEAKER using the keys in order to listen to a message being
recorded.
To activate the CALL FILTERING mode:
Press keys MENU, 4, 2, 6, 1 and OK.
To deactivate the CALL FILTERING MODE:
Press keys MENU, 4, 2, 6, 2 and OK.
8. REMOTE INTERROGATION OF THE VOCAL ANSWERING MACHINE
The interrogation code allows you to:
- remotely interrogate your voice answering machine (remote consultation of voice messages),
- locally consult the voice messages and the fax messages on your unit if the access is locked.
On delivery, the vocal answering machine is not capable of being interrogated remotely. To make this possible, you
should enter a remote interrogation code consisting of four digits other than 0000.
This function allows you to define the code necessary for locally or remotely accessing the vocal messages recorded
or the faxes received by your machine and stored in memory.
To enter an inquiry code, press MENU, 4, 3 and OK keys.
Enter your remote inquiry code.
Press the OK key to confirm your choice.
To access your voice messages remotely:
On the remote telephone, dial your number.
Press the * key during the announcement (or during the bips if the announcement has not been recorded).
Type your 4 digit remote interrogation code.
Listening of all the voice messages starts automatically.
At the end of listening, or if there are no messages, the machine sends a series of bips.
For remote calling to work, you should use a telephone configured in tone dialling mode.
You can carry out the following operations over a remote telephone:
Whilst listening:
•
pause or resume message listening by pressing 5,
•
go on to next message, by pressing 6,
•
start listening to message again, by pressing 4,
•
go back to previous message, by pressing 4 twice.
After listening:
•
delete received messages, by pressing 1 and 5,
•
record your announcement, by pressing 8 and 3 and stop the
recording of your announcement, by pressing any key,
•
listen to your announcement, by pressing 3,
•
switch on your answering machine, by pressing 7,
•
switch off your answering machine, by pressing 9,
•
resume message listening, by pressing 5.
Delete
1
2
Announce
3
4
5
6
machine
7
8
9
*
0
Answering
ON
machine
Answering
OFF
Messages
(Menu)
FAX
Last
Message
Next
Message
Message
#
CH08 23228395-7.P65
10/08/2000, 07:43
34