TA Triumph-Adler CX 8020 - Manual (Page 28)

4. Insert the Spool into the new roll paper with pressing
3
5
down the Lock Lever (3).
And then align the side face of roll paper with the
concerning size mark (5) printed on the Spool.
When aligned, release your hand from the Lock
Lever (3) to lock the roll paper firmly.
5. Install the Spool with the new roll paper to the inner groove of the Spool Guides.
Then push in the Spool Guides.
NOTE
1. Return Spool Guide as shown in illustration.
2. Handle carefully as roll paper is heavy.
Chapter 2 Basic Operation 2-6