TA Triumph-Adler CX 8020 - Manual (Page 72)

4. 1. 1. 5 Code “J4” : Incorrect insertion of Cut Sheet Paper
Mis-feed Code “J4” is indicated when you insert the cut sheet
STAND BY
SL
LIGHTER DARKER
FILM
VELLUM/TRACING
PLAIN PAPER
MEDIA
ROLL
CUT SHEET
C
CLEAR DECREASE INCREASE
LEAD EDGE
TRAIL EDGE
CUT MODE
DECREASE INCREASE
C
CLEAR
STOP
ALL CLEAR
paper to the Bypass Feeder mistakenly when the CX 8020 is
copying with the roll paper.
Rear Front
Pull out the cut sheet paper from the Bypass Feeder.
NOTE
Confirm that the Mis-feed Indicator is put out and the Paper Mis-feed Code disappears
after removing the mis-fed paper.
If the Mis-feed Indicator lights again, some more paper may be mis-fed anywhere in the
machine, so please check other areas as well.
Chapter 4 Error Treatment 4-13