TA Triumph-Adler CX 8020 - Manual (Page 36)

3. Ensure that the Original Table (1) is open.
1 2
Move the Original Guide (2) according to the
width of original as needed.
NOTE
In case you will make a multiple copy, slide the Original Guide fully to the right after you
insert the original. Otherwise it is impossible to start multiple copy.
2
4. Put the original with face down on the Original Table,
and then insert it under the Original Feed Unit along
the Original Guide (2) until the leading edge touches
the feeding roller.
The Original is accepted, a little, remains a moment,
and then transported for the copy.
NOTE
Please wait for a moment if the WAIT Indicator is lighting, as it is impossible to make a copy
(If you set the original although the machine is warming up, both the READY indicator and
WAIT indicator flash at the same time.)
Chapter 2 Basic Operation 2-14