TA Triumph-Adler CX 8020 - Manual (Page 43)

3. Remove the Wast Toner Bottle (4) gently.
4
4. Install the new Waste Toner Bottle.
Then hold it with the Bracket and tighten the
Screw Knob (5).
5. Close the Upper Unit.
Chapter 2 Basic Operation 2-21
NOTE
1. If toner spill out from the bottle, clean with a wet cloth.
2. If your hand or your cloth is soiled with the toner, dust the toner.
If it is unable to dust it, wash the clothing with the cold water.
(Do not use the hot water because the toner will soak into fibre.)
3. Close the opening of Waste Toner Bottle with an Adhesive Tape, and put the bottle
into a vinyl bag. Keep it until the maintenance service comes.
5