TA Triumph-Adler CX 8020 - Manual (Page 40)

5. Move the Original Guide (4) according to the width of
4
original.
6. Put the original with face down on the Original Table,
and then insert it under the Original Feed Unit along
the Original Guide (4) until the leading edge touches
the feeding roller.
The Original is transported a little, remains for a
moment, and then transported for the scan.
NOTE
Please wait for a moment if the WAIT Indicator is lighting, as it is impossible to make a copy
(If you set the original although the machine is warming up, both the READY indicator and
WAIT indicator flash at the same time.)
Chapter 2 Basic Operation 2-18