TA Triumph-Adler CX 8020 - Manual (Page 66)

4. 1. 1. 3 Code “J2” : Paper Mis-feed at Paper Turning Area
Mis-feed Code “J2” is indicated when the paper is mis-fed at the
STAND BY
SL
LIGHTER DARKER
FILM
VELLUM/TRACING
PLAIN PAPER
MEDIA
ROLL
CUT SHEET
C
CLEAR DECREASE INCREASE
LEAD EDGE
TRAIL EDGE
CUT MODE
DECREASE INCREASE
C
CLEAR
STOP
ALL CLEAR
Paper Turning Area.
Rear Front
Remove the mis-fed original in the following direction.
1. Open the Front Door (1).
1
2. Bring up the Feeding Roller Cover (2).
Chapter 4 Error Treatment 4-7
2