TA Triumph-Adler CX 8036 - Manual (Page 12)

Section 1 Basic Printer Functions 1-6
Printer
Subject Specification
Model CX8036
Configuration
Console – Single Footprint
Printing method LED Array Electro-Photography
Photoreceptor Organic Photoconductive Drum
Print speed 60mm per second
(Metric) 2 A0 / minute
(Inch) 2 E or 4 D Landscape / minute
Print head LED Array – Calibrated
Resolution 600dpi x 600dpi
Print width Maximum 914mm or 36”
Minimum 279mm or 11”
Print length Maximum
(Standard) 3.6m or 11.8’
(Option) 24m or 75’
Minimum 210mm or 8.5”
Warm up time Less than 5
First print time 24 seconds (D Landscape)
32 seconds (E)
Fusing method Heat - Pressure Rollers
Development method Dry, non-magnetic mono-component toner
Media Plain Paper 64 to 80g/m 2 - US Bond (20lbs)
Tracing Paper US Vellum (20lbs)
Film 4 MIL
Recommend media for electro-photography process
Storage of consumables Store toner from 0 to 35 C ( 32 to 95 F ) and within the humidity
range from 10 to 85% RH.
NOTE : specifications subject to change without notice
NOTE
If the page is longer than 3.6m, image quality, function and
reliability are not guaranteed.