TA Triumph-Adler CX 8036 - Manual (Page 60)

Section 2 Copy Mode 2-20
1.8.6 Media Remaining
The installed roll information is displayed in the button of the particular roll deck. Beside
each deck is a volume of media that currently is left on the roll of media.
Indicators will display full, 3/4 ,1/2, 1/4 or empty
1.8.7 Installing Roll Media
When media is replaced or installed, a screen will automatically appear. This screen
allows the setting of the media type and width. Please see the BASIC PRINTER
FUNCTION ( Section 1 ) for the procedures to replace a roll of media.
a) if no changes are required, press cancel
b) if changes are required from the currently settings displayed, select the correct
media type and size for each deck and press OK.
This screen shows 36” bond for
deck one and 18” Vellum for deck two
Media types settings noted above can be changed at any time by pressing the Media
button on the main Copy Screen.