TA Triumph-Adler CX 8036 - Manual (Page 48)

Section 2 Copy Mode 2-8
2. 0 Operation Details
1.3 Main Screen
The main Copy screen is selected with the Copy Button.
It contains all user functions for copying. The following pages details the functions and
settings of each button and sub screens that can be used to adjust the copy mode
parameters to achieve the required result.
1.4 Original
This region allows the setting of the Size Mode (Engineering or Architectural) and the
original image type.
1.4.1 Original Size Mode
This button is used to select the Size Mode of Engineering or Architectural .
This will allow the automatic width detection system to determine the image width when an
original is placed in the scanner.
Engineering widths = 34, 22, 17, 11, and 8.5 inches
Architectural widths = 36, 30, 24, 18, 12, and 9 inches