TA Triumph-Adler CX 8036 - Manual (Page 81)

Section 3 Scan Mode 3-13
Make any of the required adjustments / selections and press “OK” to accept. The
selections will now be displayed on the main Scan screen
2.7.1 Mirror
Select this button to “mirror” a scan. This can be utilized on originals that
may have the actual image on the reverse side such as older “sepia” or
“film” documents.
2.7.2 Invert
Select this button to change a region of white to black and visa versa of a
scanned document. This is normally used for “negative” documents or
“blue prints”.
2.7.3 Stamp
Select “Stamp” to display another sub screen. This will allow the selection of a “Stamp” or
“Water Mark” to be placed on the scanned image. It will be imbedded into the image.
a) use the Arrow buttons to scroll
through the available stamps and
then select the stamp from the list.