TA Triumph-Adler CX 8036 - Manual (Page 61)

Section 2 Copy Mode 2-21
1.9 Length
Two methods determine the length of the copy. These two methods are
Auto (may also be known as Syncro Cut or Automatic Cut ) and Standard Cut.
1.9.1 Auto
This mode allows the media length to be determined by the original
length. This also takes into consideration any enlargements or
reductions that are applied to an image as well, to prevent excess
media without image.
1.9.2 Standard
This mode allows the media length to be determined by a standard length or a length set
manually by the user with a number pad.
a) select Standard Cut. A sub screen will appear. When Standard is used, the roll
must also be determined.
- If Auto Roll is selected in the Media region the following screen will appear,
prompting the media to be selected. Select the roll.
NOTE
Auto Length works in conjunction with Auto Roll
noted in 2.6.1.