TA Triumph-Adler CX 8036 - Manual (Page 144)

Section 7 AutoCAD HDI Driver 7-6
5) Identify your plotter / printer model.
a)If KIP is in the list, simply select KIP from
your list of manufacturers and click “Next.”
b) If KIP is not in the list, click the “Have Disk”
button and you will be able to browse for the
plotter driver from your Software CD.
The file you are searching for is located in the
Drivers\KIP HDI folder and should appear as
KIPx.hif.
6) Once you have pointed to this file KIP will appear in the list and then select it from
your list of manufacturers and click “Next.”
7) The next screen is the PCP and PC2
importation screen. This screen allows users
of previous AutoCAD versions to import their
PCP and PC2 files to the AutoCAD 2000
family PC3 file format for use in the AutoCAD
2000 product.
(as noted in step #3)
If the user does not wish to migrate or does
not have any PCP or PC2 files, click the
“Next” button and proceed with the
installation.
8) Output Port Selection. Select KIP0, which
is the Port created at the time the KIP
Windows driver is installed.
Note
KIP6.hif is used as the driver file for AutoCAD 2000
KIP7.hif is used as the driver file for AutoCAD 2000i and AutoCAD 2002
KIP8.hif is used for AutoCAD 2004, 2005 and 2006.
Note
The KIP windows driver should be
installed prior to the AutoCAD driver to
use this port. If you choose not to use
this method, select Plot to File.