TA Triumph-Adler CX 8036 - Manual (Page 79)

Section 3 Scan Mode 3-11
2.4.2 Density
To override the “Automatic” setting, “Density” can be adjusted.
Deselect “Auto” to enable “Density”.
When the arrows are pressed the background density will be set to a
desired level. This will suppress or enhance the background of the
original.
2.4.3 Sharpness
To override the “Automatic” setting, “Sharpness” can be adjusted.
Deselect “Auto” to enable “Sharpness”.
When the arrows are pressed the line sharpness will be increased to
remove rough lines or decreased when photos are copies to allow
smoother graduations.
2.4.4 Dither
To override the “Automatic” setting, “Dither” can be adjusted.
Deselect “Auto” to enable “Dither”.
By pressing the dither button,
a) None
b) Fine
c) Medium or
d) Course
dither of the image can occur. This will change how the dots are
arranged to create the final image of the copy. For fine lines a
“Course” dither pattern may be desired. For Photos “None” may be
desired.
2.5 DPI
Scroll through the DPI button to select the required scan resolution.
Choices are 200, 300, 400 or 600 DPI.