TA Triumph-Adler CX 8036 - Manual (Page 54)

Section 2 Copy Mode 2-14
b) The fold selected will be displayed in the button.
c) Select OK
1.7.4 Stamp
Select “Stamp” to display another sub screen. This will allow the selection of a “Stamp” or
“Water Mark” to be placed on the scanned image. It will be imbedded into the image.
a) use the Arrow buttons to scroll through
the available stamps and then select the
stamp from the list.
b) The Stamp button will now display the stamp selected.
c) Select OK
NOTE
The list of “Folds” are loaded into Copy Mode by the
system administrator or key operator. They can not be
altered or modified in any manner on the system
Operator Panel.
Please contact these persons for any additional stamps
that may be required.
Please see “KIP Request” for these functions.
An optional KIP Folder must be purchased to enable
these functions.