TA Triumph-Adler CX 8036 - Manual (Page 37)

Section 1 Basic Printer Functions 1-31
3. 1. 1. 4 Fuser Jam
1. Open the Fuser Cover (1).
2. Remove the jam paper, by carefully pulling out the
back.
3. 1. 1. 5 Optional Finisher Jam
The media is mis-fed in the optional finishing device such as a Stacker or Folder.
Remove the mis-fed paper referencing the User Guide of optional device.
1
WARNING
There are extremely hot parts inside of the Heater Area.
Do not touch any parts in the Heater Unit, or you will be burnt!
Also note that the paper may be very hot as well.
NOTE
If you can not find the mis-fed paper inside of the Fuser, refer to [3. 1. 1. 3 Resist Jam /
Internal Jam] and follow the instructions.