TA Triumph-Adler CX 8036 - Manual (Page 44)

Section 2 Copy Mode 2-4
1.2 Simple Copying
To copy, please follow these basic steps. The following chapters have details on
adjustments and parameters that the user can change to modify the copies as required.
1.2.1 Select
Copy Mode
On the lower region of the Operator Panel select “COPY”.
1.2.2 Select Size Mode
Select whether the document is an engineering or architectural size document. This will
allow the automatic width detection to function.
Engineering widths = 34, 22, 17, 11, and 8.5 inches
Architecture widths = 36, 30, 24, 18, 12, and 9 inches