TA Triumph-Adler CX 8036 - Manual (Page 23)

Section 1 Basic Printer Functions 1-17
3. If so required, loosen the knob (4), slide the position of Paper Guide (5) according to the width
of media to be installed, and then secure the Paper Guide by tightening the knob.
4. Place a new roll on a table/desk or another stable flat surface. Pressing down the Lever (3),
insert the Roll Spool (2) into the core of new roll.
NOTE
There are Size Guides (6) on the Spool.
The Paper Guide is provided with a triangle mark
(7), place the Paper Guide so that
the triangle aligns with the line of Size Guide.
4
5
6
7
3
2
NOTE
Please note the unwinding direction of the media at this time. Please see diagrams.