TA Triumph-Adler DC 2018 - Manual (Page 156)

FAX System Settings
7-2 OPERATION GUIDE
Menu Table
For the system setting menu using in this chapter, refer to the Menu Table
below. To access the system setting menu, press System Menu/Counter.
NOTE: To perform these settings, press S or T to select the menu/
submenu/item and Enter to confirm your selection.
Main
Menu
Sub
Menu1
Sub
Menu2
Options Description
Reference
Page
Report Report
Setting FAX TX
Report Off, On For periodic printouts of
transmission reports (On/Off). page 7-4
FAX RX
Report Off, On For periodic printouts of reception
reports (On/Off). page 7-4
Result
Rep. Set. Send
Result Off, On,
On(Conditions) For printouts of transmission results
(On/Off). page 7-5
FAX RX
Result Off, On,
On(Conditions) For printouts of reception results
(On/Off). page 7-5
Common
Setting Sound
Setting FAX
Speaker Off, Minimum,
Middle,
Maximum Adjust the speaker level and
volume of the fax monitoring tone. page 7-8
FAX
Monitor Off, Minimum,
Middle,
Maximum Adjust the volume of the built-in
speaker during auto-transmission in
off-hook mode when T On-Hook is
not pressed. page 7-8
FAX
Setting FAX TX
Setting Retry
Times 0 – 14 Times † Specify the number of redial
attempts if the other party’s line is
busy. page 7-10
FAX RX
Setting FAX
Media
Type All Media Type,
Plain,
Transparency,
Rough, Vellum,
Labels,
Recycled,
Preprinted,
Bond,
Cardstock,
Color,
Prepunched,
Letterhead,
Envelope,
Thick,
Custom 1–8 Select the type of paper to be used
to print received faxes. page 7-11