TA Triumph-Adler DC 2018 - Manual (Page 230)

Sending a Fax
2-19
NOTE: The changes will only apply to the present transmission and the
corresponding settings will return to those previously made in the Default
Setting dialogue box once that transmission is completed.
2 Refer to (4) Sender Information Tab on page 2-12 for more detailed
information on the corresponding settings in that tab.
3 To start the fax transmission, click on the Send button. To continue the
settings for other tabs, click on another tab.
Transmission Control
Perform the following procedure when you want to use your computer to
verify the status of a fax transmission currently being processed, or to
actually terminate that transmission.
1 Once a fax transmission starts being processed, a Transmission Control
icon will be displayed in the Windows Task Bar.
2 Double-click on that icon to access the Transmission Control window
which indicates the status of all transmissions being processed.
3 To terminate any transmission, select that transmission and then select
Cancel from the Document menu.
INFORMATION
If you right-click on the Transmission Control icon, the menu shown below
will appear. Select Version Information if you want to check the version
of your Transmission Control software. Select Exit to quit Transmission
Control and delete the icon from the Task Bar.