Automatic fax reception, Automatic fax reception -17 – TA Triumph-Adler DC 2018 User Manual
Page 45
Basic Operation
OPERATION GUIDE
3-17
Automatic Fax Reception
To use the FAX System for fax communications only, select Automatic Fax
Reception mode. In this mode, no user operations are required to receive
faxes.
NOTE:
Before faxes can be received automatically, you must select Auto
(Normal) using the method described in Fax Reception Mode on page 7-
14.
The FAX System provides the following modes to receive a fax:
•
Automatic Fax Reception
•
Manual Fax Reception...page 4-14
•
Auto FAX/TEL Switching...page 7-14
•
Auto FAX/Answering Machine Switching...page 7-15
•
DRD Reception...page 7-16
To change reception modes, follow the procedure given in Fax Reception
Mode on page 7-14.
Delayed delivery
If received documents cannot be output because the FAX System has run
out of paper or due to paper jam, the FAX System will temporarily store
received documents in memory. The documents are printed later when
printing becomes available.