TA Triumph-Adler DC 2018 - Manual (Page 36)

Basic Operation
3-8 OPERATION GUIDE
NOTE: To configure the detailed transmission settings such as
subaddresses, perform the procedure given in Detailed Transmission
Settings on page 3-8.
Besides entering the other party’s fax number using the numeric keys, you
can dial using the following methods:
• Dialing from the Address Book...page 3-24
• Manual redial...page 3-39
• One-touch dial...page 4-15
• Program...page 4-23
14 Press Start to start fax.
NOTE: When you select
continuous scanning, a
confirmation screen will prompt
you to continue scanning the
original document after you press
Start.
To continue scanning, change
original document and press
Start.
If you are finished scanning,
press right Select.
Detailed Transmission Settings
After entering the other party’s fax number, you can complete settings for
the subaddress, encrypted communication, transmission speed, and ECM
communication.
Entering the Subaddress
Enter the subaddress and the password for subaddress confidential
communication. For details on subaddress communication and
subaddress confidential communication, refer to chapter 5 Advanced
Functions.
1 Press right Select on the destination fax input screen.
*
Set original
Page(s)
Cancel
Job No.
4
8
and press start key.
End Scan
:
: