TA Triumph-Adler DC 2018 - Manual (Page 17)

FAX System Parts
OPERATION GUIDE 1-3
Operation Panel
The following keys and indicators are used to send or receive faxes. For
information on keys and indicators used to make copies, refer to the
Operation Guide.
1 Status/Job Cancel Key and Indicator
Press this key to enter Status/Job Cancel mode and to check job
status or cancel jobs. The Status/Job Cancel indicator remains
on while in Status/Job Cancel mode.
2 Send Key and Indicator
Press this key to enter Send mode for fax and scanning. The
Send indicator remains on while in Send mode.
3 Document Box Key and Indicator
Press this key to enter Document Box mode. Use this mode to
send documents confidentially using subaddress communication
and for polling transmission. The Document Box indicator
remains on while in Document Box mode.
4 One-touch Keys (1 to 8)
Each one-touch key can store a fax destination or chain dial
number. The keys can also be used to recall programmed
sequences.
5 Program Key and Indicator
Press this key to use a program.
6 Scan Resolution Key and Indicator
Press this key to set the scanning resolution.
7 Function Key and Indicator
Press this key for additional function such as direct transmission,
timer-based transmission and fax polling reception.
8 Send/Receive Indicator
This indicator flashes during fax transmission and reception.
14 13 10 8
27 18 21 19 20
23
24
26
25 28
12 11 9
5
4 7
17 15
16
6 1
2 3
22
Ready to send.
2005/01/08 11:09
Subject Placemnt
Left Off