TA Triumph-Adler DC 2025 - Manual (Page 25)

Page 1-8
1-3 Using the Scanner Function
The following gives an explanation of the scanning functions of your copier. Make the appropriate settings
according to your scanning needs.
For more detailed information regarding the setting procedures for the functions in each different scanner,
refer to the <Setup Edition> of your Operation Guide.
Basic settings
Select original size
Input size
Select sending
size
Scanning
resolution
Orig. set direction
File type
Selects the available original sizes (scanning area).
Selects the desired scanning area based on the entered
original size.
Selects the available image transmission sizes (size of
the transmitted image).
Sets the desired level of fineness (resolution) at which
the original will be scanned.
Specifies the position of the top edge of the original once
the original is set.
Sets the desired format of the image file.
See page
1-12
See page
1-13
See page
1-13
See page
1-14
See page
1-14
See page
1-12