TA Triumph-Adler DC 2025 - Manual (Page 40)

Page 2-4
2-3-1 If you are having trouble connecting to the scanner from a Web browser…
If you are trying to make settings related to the Scanner interface Card or to utilities in the scanner itself
from a Web browser and those settings are not being applied properly regardless of the fact that the
network settings in the scanner itself are correct, turn the power to the scanner off and then back on again.
The Scanner Interface Card will then reboot. This will take a few minutes, so please wait until the reboot is
completed.
2-3-2 If a message appears which informs you that you can not connect, such as
“Could not open Internet Site XXXXX”...
Check the following point:
• Is the initial mode screen (“Ready to copy.”) displayed on the scanner?
→ If the initial mode screen is NOT displayed, return to that mode screen.
2-3-3 If “Cannot Find Page” appears…
Check the following point:
• Is the scanner fully up and running?
→ If NOT, wait for awhile before trying to connect again.
2-3-4 If a message appears which informs you that access is not allowed, such as “xxx
Access is not allowed”...
Check the following point:
• Is another operation in progress on the copier-scanner?
→ Confirm that the operation is completed and that the message display has returned to the Select
Scanner Function screen, and then attempt the desired scanning operation again.
2-3 Cautions