TA Triumph-Adler DC 6140L - Manual (Page 131)

4
4-11
Copying Functions
Types of Page Boundary Lines
The following types of the boundary lines are available.
The procedure for using Combine mode copying is explained below.
1 Press the Copy key.
2 Place the original.
3 Press the Function Menu key. Function Menu appears.
4 Press the U or V key to select [Combine].
5 Press the OK key. Combine appears.
6 Press the U or V key to select [2 in1] or [4 in 1].
7 Press [Detail] (the Right Select key).
8 Press the U or V key to select the desired layout and
then press the OK key.
None Dotted Solid Positioning
Mark
Function Menu: a b
*********************
2 Collate
T
3 Duplex T
[ Exit ]
1 Paper Selection T
Combine: a b
*********************
2 2 in 1
3 4 in 1 1 *Off
2 in 1 Layout: a b
*********************
2 e R to L 1 *g L to R f T to B