TA Triumph-Adler DC 6140L - Manual (Page 278)

8-82
Default Setting (System Menu)
FormFeed Timeout
Receiving print data from the computer, the machine may sometimes wait if there is no information signalling that the
last page does not have any more data to be printed. When the preset timeout passes, the machine automatically
prints paper. The options are between 5 and 495 seconds.
Use the procedure below to set the form feed timeout.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the U or V key to select [FormFeed Timeout].
4 Press the OK key. FormFeed Timeout appears.
5 Press the U or V key to set the Form Feed Timeout. You
can set the timeout delay in seconds. You cannot use the
numeric keys to enter this value.
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
LF Action
Set the line feed action when the machine receives the line feed code (character code 0AH). The table below shows
the available settings. The default setting is LF Only.
Use the procedure below to specify a LF action.
Sys. Menu/Count.:a b
5 Common Settings
6 Copy
*********************
[ Exit ]
7 Printer
Printer: a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.
FormFeed TimeOut: * b
(5 - 495)
******30*Sec.
Item Description
LF Only Only line feed performed.
LF and CR Line feed and character return performed.
Ignore LF No line feed performed.