TA Triumph-Adler DC 6140L - Manual (Page 217)

8
8-21
Default Setting (System Menu)
Special Paper Action
When printing on Prepunched, Preprint, and Letterhead, punch-holes might not be aligned or the print direction might
be upside-down depending on how originals are set and the combination of copying functions. In such a case, select
[Adj. PrintDirect] to adjust the print direction. When paper orientation is not important, select [Speed Priority].
The table below lists the available settings and their details.
If you select [Adj. PrintDirect], load paper according to the steps below.
Example: copying on Letterhead
NOTE: When loading cover paper in a multi purpose tray, load the face, on which printing is supposed to be done,
upward. When loading cover paper in a cassette, load the face, on which printing is supposed to be done, down.
Use the procedure below to specify the actions performed for special paper types.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
Item Description
Adj. PrintDirect Adjust print direction. Print speed is a little
slower. Select this item to print on
Prepunched, Preprint and Letterhead.
Speed Priority Give the job speed top priority and
disregard the paper orientation. Select this
item when paper orientation is not
important.
Original
Original
Finished
Finished
Cassette
Cassette Multi Purpose Tray
Multi Purpose Tray Paper
Paper
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
[ Exit ]
5 Common Settings