Installing software, Installing the software in windows, Installing software -16 – TA Triumph-Adler DC 6140L User Manual
Page 50: Computer -16
Preparation before Use
2-16
Installing Software
Installing the Software in Windows
If you are connecting this printer to a Windows PC, follow the next steps to install the print
ing system driver. The
example shows you how to connect your printer to a Windows Vista PC.
You can use either Express Mode or Custom Mode to install the software. Express Mode automatically detects
connected printers and installs the required software. Use Custom Mode if you want to specify the printer port and
select the software to be installed.
1
Turn on the computer and start up Windows.
If the Welcome to the Found New Hardware Wizard dialog box displays, select Cancel.
2
Insert the DVD-ROM supplied with the printer into the optical drive of the PC. In Windows 7, Windows Server
2008 and Windows Vista, the user account control window may appear. Click Allow.
The installation program launches.
NOTE:
If the software install wizard does not launch automatically, open the DVD-ROM window in Windows
Explorer and double-click Setup.exe.
3
Click View License Agreement and read the License Agreement. Click Accept.
4
Click Install software.
ROM.
Ensure the printer is plugged in and connected to the PC before installing the print
ing system driver from the DVD-
driver.
NOTE:
In Windows operating systems, you must be logged in with administrator rights to install the prin
ting system