TA Triumph-Adler DC 6140L - Manual (Page 296)

8-100
Default Setting (System Menu)
8 Press the OK key. Completed. is displayed and the
screen returns to the Send/Box Density menu.
Correct. Bk Line
Correct fine black lines (black streaks caused by contamination), which may appear on the copies, when the
document processor used.
The table below shows the available settings.
NOTE: Using Correcting Fine Black Line can impair reproduction of fine characters. It is recommended to keep the
default ([Off]).
Use the procedure below to specify the setting for correcting fine black lines.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Adjust/Maint.].
Paper feed
direction
Item Description
Off No correction performed.
On(Low) Correction performed. The reproduction of
the image becomes lower when using Off.
On(High) Correction performed. Select this item if
black streak remains after using On (Low).
The reproduction of the image becomes
lower when using On (Low).
Sys. Menu/Count.:a b
: Document Box
; Edit Destination
*********************
[ Exit ]
< Adjust/Maint.