TA Triumph-Adler DC 6140L User Manual
Page 243
8
8-47
Default Setting (System Menu)
Collate
Set the defaults for Collate. The table below shows the available settings.
NOTE:
Refer to page 3-15 for Collate/Offset.
Use the procedure below to set the default Collate/Offset settings.
1
In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
2
Press the OK key. The Common Settings menu appears.
3
Press the U or V key to select [Function Default].
4
Press the OK key. The Function Default menu appears.
5
Press the U or V key to select [Collate].
6
Press the OK key. Collate appears.
7
Press the U or V key to select [Off] or [On].
8
Press the OK key. Completed. is displayed and the
screen returns to the Function Default menu.
Item
Description
Collate
Off
Collate not performed.
On
Collate performed.
Sys. Menu/Count.: a
b
3 System
4 User/Job Account
*********************
[ Exit
]
5 Common Settings
Common Settings: a
b
*********************
2 Default Screen
3 Sound
[ Exit
]
1 Language
Function Default: a
b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit
]
1 Color Selection
Collate:
a
b
1 Off
*********************
2 *On