TA Triumph-Adler DC 6140L - Manual (Page 379)

11
11-5
Management
Login/Logout
Once you enable user login administration, a login user name and password entry screen appears each time you use
this machine.
Login
Log in using the procedure below.
NOTE: Refer to Character Entry Method on Appendix-5 for details on entering characters.
1 If the screen below appears during the operations,
perform the following login operations.
2 Press the OK key, enter the login user name, and then
press the OK key.
3 Press the V key to select [Login Password], press the
OK key, enter the login password, and then press the OK
key.
4 Check the login user name and password are correct,
and press [Login] (the Right Select key).
Logout
To log out the machine, press the Logout key to return to the
login user name/login password entry screen.
Auto Logout
Logout is automatically executed in the following cases:
• When the Power key is pressed to enter the sleep mode
• When auto sleep is activated
• When auto panel reset is activated
• When auto low power mode is activated
Login User Name L b
*******************
Login Password:
[ Login ]