TA Triumph-Adler DC 6140L - Manual (Page 299)

8
8-103
Default Setting (System Menu)
4 Press the OK key. The Service Setting menu appears.
5 Press the U or V key to select [Auto Drum Refresh].
6 Press the OK key. Auto Drum Refresh appears.
7 Press the U or V key to select [Off], [Standard] or
[Long].
8 Press the OK key. Completed. is displayed and the
screen returns to the Service Setting menu.
Drum Refresh
This sets the refresh mode for the drum. When the printing quality declines, refreshing the drum can restore the
printing quality. This is primarily used for maintenance by service personnel.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu appears.
3 Press the U or V key to select [Service Setting].
4 Press the OK key. The Service Setting menu appears.
5 Press the U or V key to select [Drum Refresh].
Service Setting: a b
*********************
2 Network Status
3 New Developer
[ Exit ]
1 Service Status
Auto Drum Refresh:a b
*********************
2 Standard
3 Long
1 *Off
Sys. Menu/Count.:a b
: Document Box
; Edit Destination
*********************
[ Exit ]
< Adjust/Maint.
Adjust/Maint.: a b
*********************
2 Send/Box Density
3 Correct. Bk Line
[ Exit ]
1 Copy Denst. Adj.
Service Setting: a b
*********************
2 Network Status
3 New Developer
[ Exit ]
1 Service Status