Network setup (lan cable connection), Network setup (lan cable connection) -14 – TA Triumph-Adler DC 6140L User Manual
Page 48
Preparation before Use
2-14
Network Setup (LAN Cable Connection)
The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4),
TCP/IP (IPv6), IPX/SPX, NetBEUI, IPSec, and AppleTalk. It enables network printing on the Windows, Macintosh,
UNIX, NetWare and other platforms.
The table below shows the items required for each of the settings.
Configure the printer's network parameters as appropriate for your PC and your network environment.
For details of the procedure, refer to the Network Setup on page 8-120 or Network Security on page 8-139.
NOTE:
When
Embedded Web Server is used, network parameters and security settings can be conveniently
changed and checked from your PC. For more information, refer to
Embedded Web Server (Settings for E-mail) on
page 2-28.
Menu
Submenu
Setting
System
Network
Setting
TCP/IP
Settings
TCP/IP
On/Off
IPv4 Setting
DHCP
On/Off
Bonjour
On/Off
IP Address
IP address
Subnet Mask
IP address
Default Gateway
IP address
IPv6 Setting
On/Off
Protocol Detail
NetBEUI
On/Off
SNMPv3
On/Off
FTP (Server)
On/Off
FTP (Client)
On/Off
Port number: 21
SMB
On/Off
SNMP
On/Off
SMTP (E-mail TX)
On/Off
POP3 (E-mail RX)
On/Off
RAW Port
On/Off
LPD
On/Off
IPP
On/Off
Port number: 631
IPP Over SSL
On/Off
HTTP
On/Off
HTTPS
On/Off
LDAP
On/Off