Scanning image using application, Scanning image using application -25 – TA Triumph-Adler DC 6140L User Manual
Page 163
5
5-25
Sending Functions
Scanning Image using Application
Be sure that you connect your PC with the machine using the USB cable and install the TWAIN or WIA
Driver. The scan can be carried out from any TWAIN or WIA compatible application program. For details of installation
for TWAIN or WIA driver, refer to Quick Installation Guide.
IMPORTANT: When scanning a document from a TWAIN or WIA compatible application, set Auto Sleep to [Off]. For
this setting, refer to Auto Sleep ON/OFF on page 8-34.
The following procedure is an example for scan operation using the TWAIN Driver. Operate the WIA Drivers in the
same manner.
1
Connect your computer to the machine using a USB
cable.
2
Place the originals in the document processor or on the
platen.
3
Use the TWAIN-compatible application to scan from your
computer.
NOTE:
When the login user name and password entry
screen appears, enter them and click the OK button.
4
Choose the appropriate settings and click Scan. The
scanned data will be sent to your computer.