PLANET GSW-1602SF User Manual
Page 48
User’s Manual of GSW-1602SF / GSW-2404SF
• Enable – 802.3x flow control is enabled on Full-Duplex mode or Backpressure is
enabled on Half-Duplex mode.
• Disable – No flow control or backpressure function on no matter Full-Duplex or
Half-Duplex mode
Ingress Rate Limit
The value of inbound traffic limitation in kilobit-per-second (kbps). Per port in step of 128
kbps.
Default : No Limit
The range between 128 Kbps to 3968 kbps.
Egress Shaping
The value of outbound traffic limitation in kilobit-per-second (kbps). Per port in step of 128
kbps.
Default : No Limit
The range between 128 Kbps to 3968 kbps.
Port Description
Make a brief description for the port to help network manager identify the device connected to
it.
Maximum Length : 8 characters
For example, label it as “IP Phone” if an IP Phone is connected to this port.
Frame Length
The value of Frame Length of per port can support.
Default: 9216 Bytes
The range is 1518 Bytes to 9216 Bytes.
Button
Apply
Press this button for save current configuration of Web Smart Gigabit Switch.
Refresh
Press this button for refresh Port Configuration screen of Web Smart Gigabit Switch.
Table 4-5
Description of the Port Configuration
-42-