82 lacp system-priority – PLANET SGS-5220-24T2X User Manual
Page 187
Command Guide of SGS-5220-24T2X
<vlan_id> VLAN identifier(s): VID
<FE80::X:X:X> IPv6 link-local address of next-hop
Default:
None
Usage Guide:
To configure static route for IPv6
Example 1:
To configure static route as below table for IPv6.
Switch# configure terminal
Switch (config)# ipv6 route 2001::7788/128 2002::1
Example 2:
To configure static route as below table for IPv6.
Switch# configure terminal
Switch (config)# ipv6 route 2001::7788/128 interface vlan 1 fe80::1
4.2.82 lacp system-priority
Command:
lacp system-priority <1-65535>
lacp LACP settings
system-priority System priority
<1-65535> Priority value, lower means higher priority
Default:
32768
Usage Guide:
To configure LACP system-priority.
Example:
To configure LACP system-priority (99).
-187-