PLANET SGS-5220-24T2X - Manual (Page 193)

Command Guide of SGS-5220-24T2X
Example:
To configure displayed lines on a screen.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# length 10
4.2.83.10 location
Command:
location <LINE>
location Enter terminal location description
<LINE> One text line describing the terminal's location
Default:
None
Usage Guide:
To configure description of location.
Example:
To configure description (taiwan) of location.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# location taiwan
4.2.83.11 motd-banner
Command:
motd-banner
motd-banner Enable the display of the MOTD banner
Default:
Enabled
Usage Guide:
To enable MOTD banner.
Example:
To enable MOTD banner..
-193-