PLANET SGS-5220-24T2X - Manual (Page 216)

Command Guide of SGS-5220-24T2X
Switch# configure terminal
Switch (config)# network-clock clk-source 1 aneg-mode slave
4.2.121 no
Command:
no
no Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function
Example:
To disable the function (loop-protect)
Switch# configure terminal
Switch (config)# no loop-protect
4.2.122 ntp
Command:
ntp
ntp Configure NTP
Default:
Disabled
Usage Guide:
To enable the NTP service
Example:
To enable the NTP service
Switch# configure terminal
Switch (config)# ntp
-216-