PLANET SGS-5220-24T2X - Manual (Page 75)

Command Guide of SGS-5220-24T2X
Switch (config-if) # access-list rate-limiter 1
4.2.45.8 access-list redirect interface
Command:
access-list redirect interface 10GigabitEthernet <port_type_list> | GigabitEthernet
<port_type_list>
redirect Redirect frame to specific port
Default:
Disable
Usage Guide:
To redirect frames to specific Port.
Example:
To redirect GigabitEthernet X/X frames to GigabitEthernet 1/2.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list redirect interface GigabitEthernet 1/2
4.2.45.9 access-list shutdown
Command:
access-list shutdown
shutdown Shut down incoming port. The shutdown feature only works when the packet length is less than 1518
(without VLAN tags).
Default:
Disable
Usage Guide:
To enable Shutdown function for the ACL.
Example:
To enable ACL Shutdown function for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
-75-