PLANET SGS-5220-24T2X - Manual (Page 313)

Command Guide of SGS-5220-24T2X
4.20.46 show ip verify source
Command:
show ip verify source [ interface ( <port_type> [ <port_type_list> ] ) ]
show Show running system information
ip Internet Protocol
verify verify command
source verify source
interface ip verify source interface config
Default:
N/A
Usage Guide:
To display the IP Source Guard configuration.
Example:
To display the IP Source Guard configuration for GigabitEthernet 1/1.
Switch # show ip verify source interface GigabitEthernet 1/1
Port Port Mode Dynamic Entry Limit
---- --------- -------------------
GigabitEthernet 1/1 enabled 1
4.20.47 show ipmc profile
Command:
show ipmc profile [ <profile_name> ] [ detail ]
show Show running system information
ipmc IPv4/IPv6 multicast configuration
profile IPMC profile configuration
<ProfileName : word16> Profile name
detail Detail information of a profile
Default:
N/A
Usage Guide:
To display the IP Multicast Profile.
-313-