PLANET SGS-5220-24T2X - Manual (Page 317)

Command Guide of SGS-5220-24T2X
Default:
N/A
Usage Guide:
To display the MLD Router Port information.
Example:
To display the MLD Router Port information.
Switch # show ipv6 mld snooping mrouter
MLD Snooping is enabled to start snooping MLD control plane.
Switch-1 MLD Router Port Status
Gi 1/1: Static and Dynamic Router Port
4.20.52 show ipv6 neighbor
Command:
show ipv6 neighbor [ interface vlan <vlan_list> ]
show Show running system information
ipv6 IPv6 configuration commands
neighbor IPv6 neighbors
interface Select an interface to configure
vlan VLAN of IPv6 interface
Default:
N/A
Usage Guide:
To display the IPv6 neighbor information.
Example:
To display the IPv6 neighbor information.
Switch # show ipv6 neighbor
2001::7766 via VLAN1: 00-30-4F-00-99-00 Permanent/REACHABLE
fe80::201:c1ff:fe00:9900 via VLAN1: 00-30-4F-00-99-00 Permanent/REACHABLE
-317-