PLANET SGS-5220-24T2X - Manual (Page 295)

Command Guide of SGS-5220-24T2X
show Show running system information
interface Interface status and configuration
veriphy Run cable diagnostics and show result.
Default:
N/A
Usage Guide:
To display the result of Cable Diagnostics.
Example:
To display the result of Cable Diagnostics for interface GigabitEthernet 1/1.
Switch # show interface GigabitEthernet 1/1 veriphy
Starting VeriPHY - Please wait
Interface Pair A Length Pair B, Length
---------------------- ------ ------ ------- -------
GigabitEthernet 1/1 OK 3 OK 3
Pair C Length Pair D Length
------ ------ ------ -------
OK 3 OK 3
4.20.22 show interface vlan
Command:
show interface vlan [ <vlist> ]
show Show running system information
interface Interface status and configuration
vlan VLAN status
Default:
N/A
Usage Guide:
To display the MAC address and IP address of specific VLAN.
Example:
To display the MAC address and IP address for all VLANs.
Switch # show interface vlan
-295-