92 lldp reinit – PLANET SGS-5220-24T2X User Manual
Page 200

Command Guide of SGS-5220-24T2X
voice Create a voice policy.
voice-signaling Create a voice signaling policy.
tagged The policy uses tagged frames.
untagged The policy uses un-tagged frames.
<vlan_id> The VLAN the policy uses tagged frames.
dscp Differentiated Services Code Point.
<0-63> DSCP value 0-63
l2-priority Layer 2 priority.
<0-7> Priority 0-7
Default:
0
Usage Guide:
To configure media-VLAN-policy of LLDP-MED
Example:
To configure media-VLAN-policy as below table of LLDP-MED
Switch# configure terminal
Switch (config)# lldp med media-vlan-policy 1 guest-voice tagged 1 dscp 45 l2-priority
5
4.2.92 lldp reinit
Command:
lldp reinit <1-10>
lldp LLDP configurations.
reinit LLDP tx reinitialization delay in seconds
<1-10> 1-10 seconds.
Default:
2
Usage Guide:
To configure Tx re-initialization delay time of LLDP
Example:
To configure Tx re-initialization delay time (5) of LLDP
-200-