PLANET SGS-5220-24T2X - Manual (Page 365)

Command Guide of SGS-5220-24T2X
To configure history buffer side for current terminal session.
Example:
To configure history buffer side with 20 lines for current terminal session.
Switch # terminal history size 20
4.21.4 terminal length
Command:
terminal length <lines>
terminal Set terminal line parameters
length Set number of lines on a screen
<lines: 0 or 3-512> Number of lines on screen (0 for no pausing)
Default:
N/A
Usage Guide:
To configure length of command display for current terminal session.
Example:
To configure length of command display with 5 lines for current terminal session.
Switch # terminal length 5
Switch # show run
Building configuration...
username admin privilege 15 password none
loop-protect
-- more --, next page: Space, continue: g, quit: ^C
4.21.5 terminal width
Command:
terminal width <lines>
terminal Set terminal line parameters
width Set width of the display terminal
<lines:0 or 40-512> Number of characters on a screen line (0 for unlimited width)
-365-