PLANET SGS-5220-24T2X - Manual (Page 98)

Command Guide of SGS-5220-24T2X
4.2.45.52 loop-protect
Command:
loop-protect
loop-protect Loop protection configuration
Default:
Enabled
Usage Guide:
To enable loop-protect for specific interface
Example:
To enable loop-protect for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # loop-protect
4.2.45.53 loop-protect action
Command:
loop-protect action [log] [shutdown]
loop-protect Loop protection configuration
action Action if loop detected
log Generate log
shutdown Shutdown port
Default:
Shutdown
Usage Guide:
To configure action mode of Loop protection for specific interface
Example:
To configure action mode (log and shutdown) of Loop protection for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # loop-protect action shutdown log
-98-