PLANET WGSD-10020 User Manual

Page 208

Advertising
background image

User’s Manual of WGSD-10020 Series

208

Host: Sender IP filter is set to Host. Specify the sender IP address in the SIP

Address field that appears.

Network: Sender IP filter is set to Network. Specify the sender IP address and

sender IP mask in the SIP Address and SIP Mask fields that appear.

•

Sender IP Address

When "Host" or "Network" is selected for the sender IP filter, you can enter a

specific sender IP address in dotted decimal notation.

•

Sender IP Mask

When "Network" is selected for the sender IP filter, you can enter a specific

sender IP mask in dotted decimal notation.

•

Target IP Filter

Specify the target IP filter for this specific ACE.

Any: No target IP filter is specified. (Target IP filter is "don't-care".)
Host: Target IP filter is set to Host. Specify the target IP address in the Target IP

Address field that appears.

Network: Target IP filter is set to Network. Specify the target IP address and

target IP mask in the Target IP Address and Target IP Mask fields that appear.

•

Target IP Address

When "Host" or "Network" is selected for the target IP filter, you can enter a

specific target IP address in dotted decimal notation.

•

Target IP Mask

When "Network" is selected for the target IP filter, you can enter a specific target

IP mask in dotted decimal notation.

•

ARP SMAC Match

Specify whether frames can hit the action according to their sender hardware

address field (SHA) settings.

0: ARP frames where SHA is not equal to the SMAC address.
1: ARP frames where SHA is equal to the SMAC address.
Any: Any value is allowed ("don't-care").

•

RARP SMAC Match

Specify whether frames can hit the action according to their target hardware

address field (THA) settings.

0: RARP frames where THA is not equal to the SMAC address.
1: RARP frames where THA is equal to the SMAC address.
Any: Any value is allowed ("don't-care").

•

IP/Ethernet Length

Specify whether frames can hit the action according to their ARP/RARP

hardware address length (HLN) and protocol address length (PLN) settings.

0: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is

equal to IPv4 (0x04).

1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is

equal to IPv4 (0x04).

Any: Any value is allowed ("don't-care").

•

IP

Specify whether frames can hit the action according to their ARP/RARP

hardware address space (HRD) settings.

0: ARP/RARP frames where the HLD is equal to Ethernet (1).
1: ARP/RARP frames where the HLD is equal to Ethernet (1).

Advertising
This manual is related to the following products: